Site Loader
How To Install CPU Cooler

So, you have installed your computer. The harder part is right around the corner. This article will tell you How To Install Cpu Cooler. When you’ve got your computer in, you need to make sure it stays cool with one of the best CPU coolers. 

If you install it poorly, your processor will heat faster and hotter than it should, and it will eventually shut down your computer to protect itself, so you want to make sure you have your cooler.

You are here because of the high temperature of your computer which is affecting your performance. Your laptop or desktop has become hot and it is causing damage to your hardware components

The CPU cooler is a small box that contains a fan that blows air on the surface of the processor. This is the most effective way to keep your CPU cool and your system performance is not affected by heat. There are many different types of Cpu coolers available in the market. You can choose a suitable one according to your requirements and budget.

Installing the Cpu cooler is not difficult and takes a lot of time. If you are a newbie and don’t know how to install a CPU cooler then it is very important for you to read this article because this will help you to install a CPU cooler easily.

The installation process of a CPU cooler is simple; you just need to follow a few steps to complete the process.

Steps To Install A Cpu Cooler

  • You need to remove your motherboard and CPU
  • You need to remove the screw from the back of the case
  • You need to place the fan on the back of the CPU cooler and slide it into the back of the case
  • You need to place the motherboard and CPU in the case
How To Install CPU Cooler

 You Need To Remove Your Motherboard And Cpu

First thing first, you need to remove your motherboard and CPU. You need to do this because if you install the fan on the top of the CPU then you will not be able to see the status of the fan. So, you need to remove the motherboard and CPU.

You Need To Remove The Screw From The Back Of The Case

Once you have removed the motherboard and CPU, you need to remove the screw from the back of the case. Once you remove the screw from the back of the case, then you can see the back of the case. If you don’t know how to remove the screw then you can ask your local service center to help you.

You Need To Place The Fan On The Back Of The CPU Cooler And Slide It Into The Back Of The Case

Once you have removed the screw, then you need to place the fan on the back of the CPU cooler and slide it into the back of the case. If you don’t know how to do this then you can ask your local service center or a friend for help.

You Need To Place The Motherboard And CPU In The Case

After placing the fan, then you need to place the motherboard and CPU in the case. Once you have placed the motherboard and CPU in the case, then you need to tighten the screws.

Line Up Your CPU Cooler

Carefully lining up the screws with the holes in your motherboard or the standoffs you installed earlier is what you need to take your cooler and hold it over the processor. It’s not necessary for all coolers, but you may need to remove fans from your cooler in order to attach your cooler.

Attach The CPU Cooler

You can use an X pattern to push in the connectors if you screw in the cooler first. Don’t put a lot of muscle into it if you tighten first and then increase tension with each pass. If you are going around the processor in a square, make sure you don’t put too much pressure on it because it can impact cooling.

Attach Any Fans

Attach the fans to the cooler now, if you removed them earlier or still have some to install. How they connect will be dependent on the fans and your cooler. If you’re using a water cooler, you’ll need to connect the water pump and any other components to each other.

Check For Or Apply Thermal Paste

Your cooler doesn’t have to go straight onto your computer. A thin layer of a thermal compound is needed to eliminate any gaps between the base of your cooler and the CPU lid. If your cooler comes with a thermal paste already applied, you should check the bottom of your cooler or the manual to see if it has pre-applied thermal paste.

 If you don’t already have thermal paste on your cooler, apply thermal paste to the top of your processor lid. There are many schools of thought about how you should apply it, but you should only apply a small amount. A small dot, no bigger than a pea, can be placed in the center of your processor lid.

One way to apply thermal paste is to spread a line across the lid of the processor and then use a credit card to spread the paste evenly.

If your processor has left the thermal paste on it from a previous cooler, do not rely on that. The thermal paste should be removed and applied again.

Now that you’ve known how to install a CPU cooler and might have installed it already but if you are looking to buy a CPU Cooler and you are short on budget, check out the best CPU cooler under 50 dollars on cranberry.

Conclusion

This was all about “How To Install Cpu Cooler”. I hope you enjoyed reading this article and learned a lot from it. This will be very helpful for you if you are installing a CPU cooler for the first time. I have also shared with you some effective ways to remove the screw from the back of the case.

Post Author: computekreviews

Leave a Reply

Your email address will not be published.