If you own Motorola Moto E (2020) XT2052 and want to install TWRP Recovery 3.5.2 root and flash on your device, then you are on the right page. The official TWRP 3.5.2 recovery for the Motorola Moto E (2020) (codename: ginna) is now available.
The specifications of the Motorola Moto E (2020) are as follows: Qualcomm SDM632 Snapdragon 632 chip (14nm), octa-core processor (4×1.8GHz Kryo 250 Gold and 4×1.8GHz Kryo 250 Silver), Adreno 506 GPU, 6.2-inch display, 95.9 cm2 (~78.)4% screen-to-body ratio), IPS LCD, 720 x 1520 pixels, 19:9 ratio (density ~271 ppi), internal storage/ RAM 32 GB RAM 2 GB, dual sensor main camera / 13 MP, f/2.0, 1/3.1″, 1.12 µm, PDAF / 2 MP, f/2.2, (depth), car camera 5 MP, f/2.0, 1.12 µm, Li-Po 3550 mAh battery, non-removable.
If you are an Android lover and want to root and restore TWRP on your beloved device, then you have landed on the right page. In this article, we will refer to the Motorola Moto E (2020) XT2052 root.
TWRP has an attractive hardware design and user interface (UI). If you follow this guide, you can install the latest TWRP for Motorola Moto E (2020) XT2052. You can download TWRP Recovery from the links in the sample section of this article. Please note that this is an unofficial TWRP recovery and only for the Motorola Moto E (2020) XT2052 (Confirm model by going to Settings > About). The following process is only for rooting and installing TWRP on Motorola Moto E (2020) XT2052, do not test this method on other devices.
If you want to unleash the full potential of Motorola Moto E (2020) XT2052 hardware, the main task is to root the device and flash custom recovery settings like TWRP. Exchange ROMs often have limited and unsupported customization options. If you have a rooted device and a flashed TWRP recovery, you can install any custom ROM, modules, kernels, Xposed, etc, as well as many applications that require access with superuser privileges to function properly. You can easily power your device with the One Click Android Root Tool, either via PC or APK, which is a quick process.
How to root the 10.of G and install TWRP recovery
READ ALSO how to root Prestigio Grace M5 LTE and install TWRP recovery.
October 2, 2018
- Brief information and benefits of TWRP recovery
- steps to unlock the bootloader of Motorola Moto E (2020) XT2052 (ginna) under Android 10
- Steps to flash/install TWRP Repair 3.5.2 on Motorola Moto E (2020) XT2052 (ginna) (Android 10)
- Procedure for Motorola Moto E (2020) XT2052 (ginna) / Magisk or SuperSU Installation
Brief information and benefits of TWRP recovery
TWRP (Team Win Recovery Project) is an open source community development project. Flashing TWRP allows your device to install any firmware, boot your smartphone, change zip files for settings, Xposed modules for settings, one-click root processes and provisioning processes. You can also make a full backup of Nandroid and restore it later, flash the image file with one click, remove bloatware, overclock and underclock. With TWRP, you can easily erase, cache and clear data after flashing an image file to reflect changes and correct minor errors caused by caching.
To install TWRP, the Motorola Moto E (2020) XT2052 phone must have an unlocked bootloader. This means that you first need to unlock the bootloader to root the device, and also perform a configuration.
Denial: Although AndroidWeblog.com covers everything very clearly so that our readers get exactly what they want, there is always a small chance that major problems may arise from the steps listed here. It is therefore in the user’s interest to follow the instructions carefully in order to avoid any incident with the device.
Rooting and flashing a custom ROM will definitely invalidate your device’s warranty and AndroidWeblog.com cannot be held responsible in any way for invalid warranties or tinkered with devices.
Check the model number, which should be as follows:
- Motorola Moto E (2020) XT2052 (Android 10) [codename: ginna].
You should make sure you read the disclaimer carefully before you routinely use your phone and agree to bear the risks.
Your phone must be at least 70% charged, otherwise complications may occur during the experiment. Don’t take any chances and charge it fully.
If you plan to root your phone or install a custom ROM, it’s a good idea to back up your phone. Back up all your media like photos, videos and everything on your PC, as well as your contacts to the cloud.
ALWAYS remember how to root the Motorola Moto G7 XT1952 and install TWRP Recovery.
(Applies to the PC method only, skip this step if you are using the APK method).
You must enable the USB debugging option by going to Settings, Apps and Development Options.
Motorola Moto E (2020) XT2052 (ginna) Root Downloads
Download the USB drivers from Motorola here.
Download the universal ADB drivers here (if the drivers are already installed on your PC, you can skip this step).
Download the Platform Tools/ SDK Tools package with Android SDK on PC from here. (Android Command Line Tools> Package SDK Tools)
Download TWRP recovery for Motorola Moto E (2020) XT2052 here :
TWRP Repair 3.5.2 (official)
Download SuperSU from Chainfire from here.
Download Magisk Manager from here.
Make sure you have downloaded the required files (link in the Requirements section of this article). Then continue with the next steps.
steps to unlock the bootloader of Motorola Moto E (2020) XT2052 (ginna) under Android 10
Message: If you already have the bootloader unlocked, you can skip these steps.
Step one: First of all, you need to connect the Motorola Moto E (2020) XT2052 device to the PC in fastboot mode. You can reboot the device for a quick start with a command in the ADB terminal:
Step two: Now open the Adb terminal on the PC and just enter this command:
Quick download of OEM unlock
Step three: Then give this order:
Quick download of OEM unlock
At this point, your device will automatically reboot. You can now root the Motorola Moto E (2020) XT2052 because the bootloader of your device is already unlocked.
Steps to flash/install TWRP Repair 3.5.2 on Motorola Moto E (2020) XT2052 (ginna) (Android 10)
Step one: Let’s assume that you have already downloaded the Android SDK platform tools (SDK Manager) on your PC. The platform tools include the necessary ADB binaries and quick downloads.
Step two: Make sure the drivers are installed on your computer. Then proceed to the next step.
Message: If USB development and debugging settings are already enabled on your device, as suggested in the Benefits section, skip steps 3 and 4 and follow step 5 directly.
Step three: Now activate the development settings on your Motorola Moto E (2020) XT2052 device. To do this, go to Settings -> About and find the build number, then click on the build number 7 times, which will activate the developer settings on your device.
Step four: If you already have USB debugging, you can skip this step. If not, open the developer settings and enable the USB debugging option.
Step 5: Now open a command prompt on the ADB computer/terminal and just type the command :
Step six: The device must not be put into the quick start mode. Now copy the TWRP.img file downloaded in the required section to the same folder where the ADB and rapidboot binaries are located. Rename the file to twrp.img and enter this command:
Quick start Flash recovery twrp.img
then run this command, enter :
Step 7 (important): On some devices, custom recovery may not be automatically replaced on first boot. You can search for a Google shortcut to put the device into recovery mode. After executing the quick restart command, hold down the appropriate key combination to enter TWRP mode. Once the device is booted into TWRP mode, TWRP automatically corrects the stock ROM to prevent TWRP from being overwritten by the stock restore.
Read ALWAYS install the Pixel Experience ROM on the Motorola Moto X4 (payton) [Android 10.0.0].
After entering the fast restart command, hold down the combination key and start in TWRP. Once TWRP is loaded, TWRP will patch the ROM to prevent TWRP from replacing the ROM. If you do not perform this step, you will need to restart the installation.
Procedure for Motorola Moto E (2020) XT2052 (ginna) / Magisk or SuperSU Installation
Make sure you have downloaded SuperSU or Magisk Manager (link in the required section of this article). Then continue with the next steps.
Warning: You can use Magisk Manager or Super SU, but only one, so choose wisely. Go to Magisk Manager if you are not sure.
Step one: Move the downloaded SuperSU or Magisk Manager file to the internal memory / SD card of your Motorola Moto E (2020) XT2052 smartphone.
Step two: Just get started on the recovery. You can also make a ROM backup via the TWRP interface. However, I recommend that you make a backup copy of the ROM. Because if the process fails, you can flash the ROM.
Step three: Press Install, then navigate to the SuperSU.zip or magisk.zip file and drag the firmware confirmation file (located at the bottom of the screen). The Magisk/SuperSU flash process has started and will take a few seconds.
Congratulations, you are now rooted in the Motorola Moto E (2020) XT2052, and you have also enabled TWRP. Now you can install Xposed Framework and customize your smartphone as you like. If you want to check it, you can download and check the root status through the Root Checker application.